Home Articles List Article Information
Egyptian Journal of Agricultural Research
Journal Archive
Volume Volume 102 (2024)
Volume Volume 101 (2023)
Volume Volume 100 (2022)
Volume Volume 99 (2021)
Volume Volume 98 (2020)
Volume Volume 97 (2019)
Volume Volume 96 (2018)
Volume Volume 95 (2017)
Volume Volume 94 (2016)
Volume Volume 93 (2015)
Volume Volume 92 (2014)
Volume Volume 91 (2013)
Volume Volume 90 (2012)
Volume Volume 89 (2011)
Volume Volume 88 (2010)
Volume Volume 87 (2009)
Volume Volume 86 (2008)
Volume Volume 85 (2007)
Volume Volume 84 (2006)
Volume Volume 83 (2005)
Volume Volume 82 (2004)
Volume Volume 81 (2003)
Volume Volume 80 (2002)
Volume Volume 79 (2001)
Volume Volume 78 (2000)
Volume Volume 77 (1999)
Volume Volume 76 (1998)
METWALLI, M. (1999). COMBINED MECHANIZATION SYSTEM'S POWER QUIREMENTS FOR COTTON CROP (SEED-BED PREPARATION AND PLANTING). Egyptian Journal of Agricultural Research, 77(1), 465-484. doi: 10.21608/ejar.1999.326685
METWALLI E. M. METWALLI. "COMBINED MECHANIZATION SYSTEM'S POWER QUIREMENTS FOR COTTON CROP (SEED-BED PREPARATION AND PLANTING)". Egyptian Journal of Agricultural Research, 77, 1, 1999, 465-484. doi: 10.21608/ejar.1999.326685
METWALLI, M. (1999). 'COMBINED MECHANIZATION SYSTEM'S POWER QUIREMENTS FOR COTTON CROP (SEED-BED PREPARATION AND PLANTING)', Egyptian Journal of Agricultural Research, 77(1), pp. 465-484. doi: 10.21608/ejar.1999.326685
METWALLI, M. COMBINED MECHANIZATION SYSTEM'S POWER QUIREMENTS FOR COTTON CROP (SEED-BED PREPARATION AND PLANTING). Egyptian Journal of Agricultural Research, 1999; 77(1): 465-484. doi: 10.21608/ejar.1999.326685

COMBINED MECHANIZATION SYSTEM'S POWER QUIREMENTS FOR COTTON CROP (SEED-BED PREPARATION AND PLANTING)

Article 35, Volume 77, Issue 1, March 1999, Page 465-484  XML PDF (4.22 MB)
Document Type: Original Article
DOI: 10.21608/ejar.1999.326685
View on SCiNiTO View on SCiNiTO
Author
METWALLI E. M. METWALLI
Agricultural Engineering Research institute, Agricultural Research Center, Dokki, Egypt
Abstract
Combined mechanization systems of primary tillage (plows) and planting methods (manual and mechanical) for cotton crop were studied on clayey soil. Strain gage instrumentation, as a measuring technique, was used to measure the pull force and the torque at left and right rear wheels of tractor for cotton seed-bed preparation. Also, the penetration force was measured before and after tillage operations and soil clods were measured after tillage. In addition, the yield was determined at picking times where the picking was manual. Statistical analyses of these data showed that the best combina­tions were "moldboard plow at 5km/h + manual planting "," chisel plow at 5 km/h + manual planting "," chisel plow at 5 km/h + planter "and "chisel plow at 4 km/h + planter respectively. Also, the torque ratio be­tween left and right wheels was unity with chisel plow and eight times with moldboard plow. The power ratio between rear wheels axis and drawbar was equal to two with chisel plow and four with moldboard plow.
Statistics
Article View: 34
PDF Download: 167